Troubleshooting: Wireless Terminal Shows No Network After Installing the Cards

First, isolate the cause

If your terminal still shows an empty or disconnected network after adding the Dimension Card and/or Infinity Range Booster, work through these checks in order. Most failures come down to the network itself, not the cards.

Check the network side

• Is the ME Controller powered? A drained or unpowered network will not respond to any terminal.
• Are the chunks around the controller loaded? If you walked far away or into another dimension, the chunks may have unloaded. Add a chunk loader or keep a player nearby.
• Is the terminal actually bound to the right network? If you have multiple ME systems, confirm the terminal was linked to the one you expect.

Check the terminal side

• Open the terminal GUI and confirm the Dimension Card and/or Infinity Range Booster are actually sitting in upgrade slots, not in your inventory.
• If the terminal requires charging, make sure it has power.
• Try removing and re-inserting the cards, then close and reopen the GUI.

Check the cards themselves

• The Dimension Card only solves cross-dimension access. It does not extend range inside one dimension.
• The Infinity Range Booster only solves range. It does not let you cross dimensions.
• If you need both behaviours, you need both cards installed in the same terminal.

If everything above checks out and it still fails, test with a second terminal to rule out a broken item.