Troubleshoot Wireless Signals Not Working

Checking Transmitter and Receiver Pairing

Ensure both your Sculk Transmitter and Sculk Receiver are tuned to the same frequency. If signals aren't connecting, verify that the receiver is powered with redstone and that the transmitter is actively broadcasting. Test by placing them close together first to confirm they're properly paired.

Positioning Issues

Receivers cannot be placed directly behind a transmitter—they must be positioned on a different face or at an angle. If your receiver isn't responding, try relocating it to a different block or wall. Transmitters can attach to any block face, so experiment with different orientations.

Signal Range and Obstacles

While wireless signals pass through blocks, ensure there's a clear path between transmitter and receiver in terms of the mod's mechanics. If you have multiple transmitter-receiver pairs, confirm each pair uses distinct frequencies to avoid interference.

Testing Your Setup

Use a simple redstone lamp connected to the receiver to visually confirm when signals are being received. If the lamp doesn't light when the transmitter is powered, double-check the frequency settings and receiver placement before expanding your network.