DownloadAdvanced Generators ModGet the files on 9Minecraft
How do I build a basic 
steam turbine setup?
Place a 
Steam Turbine Controller and attach 
Basic Turbine blocks to it, then supply Steam from a source such as a 
Heat Exchanger. The controller converts the steam into power using the attached turbine blocks.
Steam Turbine Controller and attach Basic Turbine blocks to it, then supply Steam from a source such as a Heat Exchanger. The controller converts the steam into power using the attached turbine blocks.How do I make a Gas Turbine work?
Place a 
Gas Turbine controller and connect it to a 
Fuel/Air Mixer, which combines fuel with air from a 
Gas Intake Valve. The resulting mix is burned in the controller to produce power.
Gas Turbine controller and connect it to a Fuel/Air Mixer, which combines fuel with air from a Gas Intake Valve. The resulting mix is burned in the controller to produce power.What does the 
Syngas Producer Controller do?
It converts input materials into 
Syngas, which can be stored in a 
Fuel Tank or piped to a Gas Turbine controller. Syngas is also available as a Syngas Bucket for manual 
transport.
Syngas, which can be stored in a Fuel Tank or piped to a Gas Turbine controller. Syngas is also available as a Syngas Bucket for manual transport.How do I upgrade my turbine to a better tier?
Craft the appropriate 
Upgrade Kit (Basic, Reinforced, Composite, Enhanced, or 
Advanced Turbine Upgrade Kit) and apply it to the turbine. Each tier requires the corresponding rotor, such as a 
Basic Turbine Rotor or 
Reinforced Turbine Rotor.
Upgrade Kit (Basic, Reinforced, Composite, Enhanced, or Advanced Turbine Upgrade Kit) and apply it to the turbine. Each tier requires the corresponding rotor, such as a Basic Turbine Rotor or Reinforced Turbine Rotor.What is the 
Sensor Module used for?
The Sensor Module is a block that detects conditions in the generator setup and outputs a redstone signal. It is used alongside the 
Redstone Control Module to automate generator behavior.
Sensor Module is a block that detects conditions in the generator setup and outputs a redstone signal. It is used alongside the Redstone Control Module to automate generator behavior.How do I store power from my generators?
Place a Power Capacitor block (Basic, Advanced, or High Density) and connect it to your generator's power output. Capacitors buffer energy and can be upgraded with the matching Capacitor Upgrade Kit.
Upgrade Kit.What do the Voltage Emitters do?
Low, Medium, High, Extreme, and 
Insane Voltage Emitters output power at different voltage tiers. Use the emitter tier that matches the machine or cable you are connecting to.
Insane Voltage Emitters output power at different voltage tiers. Use the emitter tier that matches the machine or cable you are connecting to.How do I move items in and out of the generator?
Use the 
Item Input Port to feed items in and the 
Item Output Port to extract items. Both attach to the generator multiblock and connect to your item transport system.
Item Input Port to feed items in and the Item Output Port to extract items. Both attach to the generator multiblock and connect to your item transport system.What is the Heat Exchanger for?
The Heat Exchanger, controlled by the 
Heat Exchanger Controller, transfers heat between fluids. It is used to produce Steam from a 
Heating Chamber for steam turbine setups.
Heat Exchanger, controlled by the Heat Exchanger Controller, transfers heat between fluids. It is used to produce Steam from a Heating Chamber for steam turbine setups.How do I get Steam for my steam turbine?
Steam is produced by the Heat Exchanger and can be piped directly to a Steam Turbine Controller. It can also be stored or moved as a Steam Bucket.What is the 
Power IO Module used for?
The Power IO Module handles power input and output for the generator multiblock. It lets you connect capacitors and emitters to the generator's internal energy buffer.
Power IO Module handles power input and output for the generator multiblock. It lets you connect capacitors and emitters to the generator's internal energy buffer.What does the Redstone Control Module do?
The Redstone Control Module lets the generator respond to redstone signals, enabling or disabling operation. Combine it with a Sensor Module to automate startup and shutdown based on tank levels or other conditions.
Redstone Control Module lets the generator respond to redstone signals, enabling or disabling operation. Combine it with a Sensor Module to automate startup and shutdown based on tank levels or other conditions.
