Get the files on 9Minecraft

Contents (4)

Standard Logic Gates
Bitwise Logic Gates
Next guides
More in this wiki

The mod adds a variety of logic gates that are only 1/8th of a block tall. These gates can be placed on any side of a block and rotated using Pliers. Most gates feature three inputs (sides and back) and one output (front).

Standard Logic Gates

Gate	Function	Inputs
AND Gate	Outputs a signal only if all three inputs are active.	3
Two-Input AND	Outputs a signal only if both inputs are active.	2
OR Gate	Outputs a signal if any of the three inputs are active.	3
NOT Gate	Inverts the input signal (Inverter).	1
NAND Gate	Outputs a signal unless all three inputs are active.	3
Two-Input NAND	Outputs a signal unless both inputs are active.	2
NOR Gate	Outputs a signal only if none of the inputs are active.	3
XOR Gate	Outputs a signal if an odd number of inputs are active.	2
XNOR Gate	Outputs a signal if an even number of inputs are active.	2
Multiplexer	Selects between two inputs based on a control signal from the back.	2 + 1 Control
Pulse Gate	Generates a 2-tick pulse upon receiving a rising edge signal.	1
Latch (RS)	A memory cell with Set and Reset inputs to store a single bit.	2
Diode	A one-way buffer that prevents backflow and acts as a 1-tick delay.	1

Bitwise Logic Gates

Bitwise gates are designed to work with Bundled Cables. They perform logic operations on all 16 channels simultaneously.

Bitwise AND/OR/XOR: Performs the operation between two bundled cable inputs.
Bitwise NOT: Inverts every channel in a bundled cable.
Bitwise Multiplexer: Selects between two bundled cable inputs.
Bitwise Diode: Acts as a buffer for bundled signals.