Verify Your Build and Fix Placement Mistakes

Check Block Placement Accuracy

After placing blocks in your schematic layer, verify everything matches the design.

1. Complete your building work on the active layer

2. Press Ctrl + B to run the verification check

3. Stash Tracker scans all placed blocks and highlights problems:

• Missing blocks appear as gaps in the schematic
• Wrong rotations show blocks facing incorrect directions (stairs, banners, heads)
• Extra blocks highlight pieces you placed outside the schematic
• Incorrect items mark slots where you used the wrong material

Fix Issues Systematically

The mod uses visual highlighting to guide corrections:

1. Address missing blocks first—these are easiest to spot

2. Check rotated blocks (stairs, banners, heads) against the schematic wireframe

3. Remove any extra blocks placed by accident

4. Replace incorrect materials with the right ones

5. Run Ctrl + B again to confirm all corrections are complete

This prevents costly mistakes and ensures your build matches the original design perfectly.