Create a Stable Flying Car

Design the Chassis

Build a rectangular frame using mechanical blocks. Keep the center of mass balanced—place heavier components centrally. A car needs at least three thrusters: two for forward/backward movement and one for lift to keep it airborne.

Position Thrusters Strategically

Place forward thrusters at the rear of your car. Mount the lift thruster underneath or at the center. Add side thrusters if you want banking or lateral movement. Ensure thrusters point in the correct direction—they push away from their mounting surface.

Install Control Systems

Attach a control block to your car frame. Bind forward thrusters to W/S keys and the lift thruster to Space. Add side thrusters to A/D if desired. Test each control individually before flying.

Refine and Test

Take off in an open area and check for tilting or spinning. If the car leans, adjust thruster positioning or power distribution using the control block settings. Once balanced, you can add decorative flaps or additional thrusters for speed boosts.