Bind a Wireless Crafting Grid to Your Storage Network

Prerequisites

Before binding, ensure your Refined Storage network is set up with at least one storage block (like a Storage Disk Drive) and a Wireless Transmitter placed and powered within range of your network.

Binding Steps

1. Craft or obtain a Wireless Crafting Grid (or Creative Wireless Crafting Grid).

2. Hold the grid in your hand and look at any block in your Refined Storage network—typically a Controller, Storage Disk Drive, or Grid.

3. Right-click the network block while sneaking (holding Shift). A binding interface will appear.

4. Confirm the binding. The grid will now be linked to that network.

5. Verify connection by opening the grid. If it displays your storage contents and crafting options, binding was successful.

Troubleshooting

If the grid shows as offline:

• Check that a Wireless Transmitter is active and powered in your network.
• Confirm you're within the transmitter's range.
• Verify the network itself has sufficient energy.
• Ensure the grid has energy (it consumes power when opened or used).