Leaving a nuclear reactor unattended puts your base at risk if temperatures climb out of control. Nuclear Control 2 gives you monitoring and control systems to watch reactor conditions from afar and respond before a meltdown occurs.
Monitoring Single Blocks from a Distance
You do not need to stand next to hazardous machinery to check its status. You can connect a remote monitor to a single block to view its information from a distance. For thermal tracking setups, you can also deploy Remote Thermo Monitors and pair them with a Counter Sensor Card.
1. Set up your remote monitor in a safe viewing area and connect it to the target block you want to observe.
2. If you are using Remote Thermo Monitors, pair them with a Counter Sensor Card to bring that sensor data onto your display panels.
3. Watch the readout to track live temperature and other reactor conditions safely.
Preventing Disasters with Alarms and Auto-Shutdown
Passive displays only help while you are looking at them. To protect your base continuously, configure your control system to react when conditions become dangerous:
1. Monitor the reactor's temperature and operating conditions through your control setup.
2. Set up the system to sound an alarm if the reactor becomes dangerous, alerting anyone nearby.
3. Configure the control system to automatically shut down the reactor when danger is detected, stopping heat buildup before a disaster happens.