How to Configure Realistic Speed and Acceleration Settings for E235 Trains

Setting Up Realistic Train Physics

To make the E235-0 and E235-1000 models behave like their real-world counterparts on your Minecraft Transit Railway lines, you should adjust the acceleration and speed parameters when setting up your routes or depots.

Applying Recommended Acceleration Values

1. Open your MTR route or train configuration menu where vehicle performance settings are controlled.

2. Locate the acceleration setting for the line or vehicle.

3. Set the acceleration value to between 2.5 and 3.2 km/h/s. Staying within this recommended bracket ensures that the custom motor sounds line up naturally with the train's movement as it pulls away from a station platform.

Adjusting Average Operating Speeds

Next, configure the operating speed along your track blocks so the trains travel at realistic paces:

1. Set the target speed along your tracks to keep the train within an average speed range of 60 to 120 km/h, depending on which E235 model you selected.

2. Use the lower end of the 60 to 120 km/h range for the E235-0 commuter train on tight urban corridors and station approaches.

3. Use the higher end of the 60 to 120 km/h range for the E235-1000 suburban train on long, straight stretches of track between distant stations.