Wiki 9Minecraft Wiki 9Minecraft

Mass-Produce One Specific Chipped Block Design with a Mechanical Saw

If you need a large stack of a single Chipped variant, the mechanical saw can carve it automatically. You don't need to craft each block by hand at a Chipped crafting table.

Set the Filter to Your Target Design

1. Get one block of the exact Chipped variant you want to end up with. This is your template.

2. Place that block in the mechanical saw's filter slot. The saw now knows which design to produce.

3. Gather your base material. It must share a tag with the design in the filter. For example, use a matching block from the same wood or stone family as your chosen variant.

Run the Material Through the Blade

1. Power the saw with kinetic energy so the blade spins.

2. Feed your base blocks into the spinning saw.

3. Each matching block that passes through turns directly into the variant shown in the filter.

4. Collect the output and check that it is the correct design before you scale up.

Tips

  • If blocks pass through without changing, check the filter first. The saw only converts blocks with tags that match the filtered variant.
  • To switch to a different design, replace the item in the filter slot. You don't need to rebuild anything.
  • Test with a small batch first. This confirms the conversion works before you commit a full chest of material.