Identifying Motor and Energiser Tiers at a Glance

When building compact power rooms, telling similar machine tiers apart from tight angles can be difficult. With the custom models and textures enabled, motors and energisers gain distinct 3D geometry and surface animations so you can verify both block tier and power status directly in the world.

Checking Motor Orientations and Tiers

Standard motors can be hard to distinguish when placed tightly against adjacent blocks or walls. With the updated models active, every motor tier displays distinct side and top block shapes:

1. Place a basic motor, golden motor, or diamond motor into your setup.

2. Check the casing from the top or any horizontal side to confirm which tier is installed without breaking blocks.

3. Walk around tight corners to verify alignment using the rebuilt 3D exterior details.

Verifying Active Energisers

Tier 1, tier 2, and tier 3 energisers each feature unique exterior visuals so you do not mix up low-tier and high-tier units along a machine line. To check whether an energiser is receiving electricity:

1. Place a tier 1, tier 2, or tier 3 energiser and connect it to your power source.

2. Turn on power to the line and watch the block surface.

3. Confirm that smooth animated energy textures move across the casing to verify active power flow.