How to Build Multi-Part Framed and Titanium-Trim Pedestrian Signals
While basic crosswalks only need a single indicator block, large urban boulevards often use tall, multi-section pedestrian light boxes or modern trim fixtures. You can build these detailed crosswalk signals by stacking modular frame sections or attaching trimmed frameless housings to roadside posts.
Stacking Three-Part Framed Pedestrian Signals
The mod includes modular top, middle, and bottom blocks that combine into a full-height pedestrian signal box.
1. Place a vertical metal pole beside the curb at your crosswalk corner.
2. Choose between the standard Framed Pedestrian Traffic Light series or the Framed Pedestrian Traffic Light 2 series.
3. Attach the Framed Pedestrian Traffic Light - Bottom (or 2 - Bottom) to the lower section of the post at eye level.
4. Place the Framed Pedestrian Traffic Light - Middle (or 2 - Middle) directly above the bottom block, and cap it with the Framed Pedestrian Traffic Light - Top (or 2 - Top).
5. Insert your chosen indicator lenses into the frame sockets, such as the Framed Pedestrian Green Signal, Framed Pedestrian Red Signal, Framed Message Green Signal, or Framed Message Red Signal.
Installing Titanium-Trim and Animated Crosswalk Units
For a sleeker modern streetscape, you can skip the stacked boxes and mount slim trimmed housings or animated walker signals.
1. Attach a Frameless Pedestrian Traffic Light - Left Titanium Trim or Frameless Pedestrian Traffic Light - Right Titanium Trim to the side of your street pole facing the crosswalk.
2. For wider islands, mount a Dual Titanium-Trim Pedestrian Signal - Green or Dual Titanium-Trim Pedestrian Signal - Red.
3. Fill standard frameless or legacy housings using the New Pedestrian Green Signal, New Pedestrian Red Signal, Legacy Pedestrian Green Signal, or Legacy Pedestrian Red Signal, or slot in an Animated Pedestrian Signal 1 through 4 for active crossing visuals.