Processing Materials Along Heated Combustion Belts

Assembling Heated Production Belts

Combustion Belts allow you to process materials directly on transport lines while they move through your factory.

1. Lay down Combustion Belts along your processing line in place of standard conveyors.

2. Connect your thermochemical network to the belts using Thermochemical Shafts or Cogwheels to supply both kinetic motion and thermal energy.

3. Inspect the belt line with Engineer's Goggles to check that operational RPM, stress capacity, and the required heat tiers are reaching the belts.

Automating Material Feeds

Once the Combustion Belts are hot and rotating, automate material handling across the line.

1. Set up Mechanical Arms to drop raw materials onto the moving Combustion Belts.

2. Allow items to process under heat as they travel along the line, refining materials for chemical chains such as Rubber Padding, Ash Bricks, or catalysts.

3. Position additional Mechanical Arms or standard belts at the end of the line to retrieve the finished items.

4. Consult the in-game Ponder scenes if you need an interactive diagram of belt and arm configurations.