Manual crafting tools do not always finish recipes instantaneously with a single tap. Each tool follows a distinct timing rhythm—such as charging up, winding up, or holding an input—before processing materials.
Operating Charge-Based Tools
Both the
Press Hammer and the
Bellows rely on a charge mechanic (charge_ticks) before delivering their effect:
1. Equip the Press Hammer and begin charging your strike. Once it finishes charging, land your hit inside the active charged-hit window (charge_window_ticks). Waiting too long past this window will miss the charged hit, requiring you to charge the hammer again.
2. Equip the Bellows and hold to complete its charge time. Be aware that Bellows behavior also depends on catalyst types, which can be customized via bellows_type_overrides in the configuration.
Operating Wind-Up and Long-Press Tools
Tools designed for continuous work require you to sustain the action past an initial startup delay:
1. When using the
Mortar or
Crusher Mortar, hold the action through the initial wind-up phase (windup_ticks). Keep going through the repeating pounding cycles (pound_cycle_ticks) until the total processing time finishes.
2.
3. For the
Infusion Gun, press and hold past the long_press_threshold instead of tapping briefly. Once passed, keep holding to extract at a steady cadence set by extract_interval_ticks.
