How to Set Up Trailing Trucks and Offset Bogies
Real steam locomotives rarely rely on driving wheels alone. To support the cab, firebox, or tender, you can add trailing trucks and offset bogie designs in various sizes.
Adding Trailing Trucks Behind Driving Wheels
1. After placing your main multi-axle driving wheels on the rails, leave a gap at the rear of the locomotive where the cab and firebox will sit.
2. Place a bogie on the track behind the driving wheels and open the bogie selection menu.
3. Select a trailing truck style and choose between the small, large, or extra-large frame sizes to keep it proportional (typically smaller than your main driving wheels).
4. Rotate the bogie frame if the truck appears backward relative to the main driving assembly.
Using Offset Bogie Designs
Sometimes a standard centered bogie puts the wheels directly inside a block you want to use for under-frame detail, steps, or ash pans.
- Fixing Spacing Issues: Open the selection menu and choose one of the offset bogie designs. Because the wheels are shifted off-center from the bogie's attachment point, you can mount the bogie in a convenient spot while shifting the actual wheels forward or backward along the rail.
- Rotating Offset Bogies: Since the mod's bogie frames are rotatable, rotating an offset bogie flips the direction of the offset. Use this to fine-tune the gap between your main driving wheels and your front or rear trucks without moving the bogie block itself.