Set Up Energy Meter in Transfer Mode

Positioning Your Meter

Place the Energy Meter block between your power source and the machines you want to monitor. The block will display real-time energy transfer rates on its screen, letting you see exactly how much power is flowing through your system.

Configuring Input and Output Sides

Right-click the Energy Meter to open its interface. You'll see options to assign which sides accept power input and which sides send power out. You can have one input side and up to four output sides.

Assign your power cable's input side first, then configure the output sides that connect to your machines. The meter will measure energy passing through in real-time.

Reading the Display

The screen shows your current transfer rate as energy moves from your power source through the meter to connected machines. This helps you identify bottlenecks, verify cable capacity, and ensure your machines are receiving adequate power. If the rate drops unexpectedly, check for broken connections or overloaded cables.