RG Visuals Shader adds water caustics and realistic reflections to oceans and rivers. Here is how to get a good look at them.
Set up first
1. Confirm RG Visuals Shader is active under Settings > Global Resources, or in your world's resource packs.
2. Open Settings > Video and set Brightness to 80 percent, the gamma the pack recommends.
Where and how to look
1. Find open water. An ocean or wide river gives the clearest view. A small pond works too, but there is less surface to reflect light.
2. Go in daylight. The effects come from sunlight hitting the water, so they show best when the sun is up.
3. Look at the surface from the shore. Look across the water at a shallow angle to see the reflections.
4. Look down into shallow water. Caustics are the shifting light patterns that sunlight makes through water. Shallow areas over sand or stone show them well.
5. Try a riverbank in a forest. You get trees, sun rays and water reflections in one view.
If the water looks flat
- Re-check the Brightness slider. A low setting dulls reflections.
- Turn off any other resource pack that changes water, or move RG Visuals Shader above it in your active pack list.
- Make sure you are viewing in daytime and not during a storm or at night.