In Utility Work Map, the conveyor belt is one of the main stations inside the Xanni Electronics workplace. As an employee, you must monitor the
line to process old animatronic parts and keep the facility's generator running while dealing with the
server virus.
Rejecting Old Endos and Recycling
Scrap
One of your core company tasks is rejecting old endos on the conveyor belt. Watch the moving line (Convier and Convier On blocks) as items and entities travel across the floor.
1. Stand near the Belt Control block to oversee the active line.
2. Watch for damaged animatronic components, such as Endo Broke, alongside regular Endo, Endo00, and Endo01 units.
3. Identify the Old Endo - Scrap items and entities (marked in your inventory with the tooltip *Recycle this.*) as well as regular Scrap.
4. Reject these defective units from the main line and route them toward the Endotrash, Endotrash2, or Endotrash3 disposal blocks to finish your recycling task.
Sending a Battery to the Generator
The conveyor belt is also how you keep the facility powered during your shift.
1. Obtain a Battery item (which carries the tooltip *Used to recharge the generator.*).
2. Place or send the Battery down the conveyor belt so it travels toward the generator.
3. If a fire breaks out along the belt—turning the line into Convier Fired blocks and surrounding props into their Fired variants—go to the powerbox (Powerbox On) or use the Fireremover block to stop the fires before continuing your conveyor belt work.
