Moving Structures with the Mover

Capturing a Structure

The Mover relocates existing structures. Place the Mover and open it. You need a Space Card to define the volume to capture. Configure the Space Card to match the dimensions of the structure you want to move, then insert it into the Mover. The Mover records the blocks within that volume.

Controlling and Monitoring the Mover

Use the Mover Controller to manage Mover operations. The Mover Control blocks (including Mover Control (Page 2), Mover Control (Page 3), and Mover Control (Page 4)) provide additional control pages for configuring the move. The Mover Status block reports the current state of the operation, so you can confirm when a capture or placement completes.

After capturing, position the destination and trigger the Mover to place the stored structure there. The Mover needs power to operate. Verify the destination volume is clear and matches the captured dimensions, otherwise blocks may be overwritten or the placement may fail. Check Mover Status throughout to track progress. The Space Chamber and Space Chamber Controller provide a contained space for handling stored structures when you need an isolated working area.