How to Build and Fuel a Deep Resonance Generator

Assemble the generator

Place a Generator Controller, then attach Generator Parts to it to form the generator body. The controller is the block you interact with to insert fuel and read output. Surround or extend the structure with Generator Parts until the controller reports a valid multiblock.

Insert fuel and collect power

Feed the generator Resonating Plate Blocks or other resonant fuel items through the controller's interface. The generator converts stored resonance into energy that you can pull from the controller or route to adjacent machines. Keep a Tank and Valve nearby if you are moving fluids as part of the same setup.

Scale output

Add more Generator Parts to raise the generator's capacity and throughput. Each part increases how much resonance the structure can hold and convert, so expand the body before adding more fuel sources. Use a Radiation Monitor near the generator to confirm the area stays within safe limits while it runs.

Shut down safely

Stop inserting fuel when you no longer need power. The generator drains its internal buffer before going idle. If radiation readings climb, move away from the controller and let the buffer empty before servicing the structure.