Setting Up the Dark Conduit with the Dark Enchanter

Why the Two Blocks Belong Together

The Dark Enchanter and the Dark Conduit are the only two blocks in the mod, and they are meant to be used as a pair. The Dark Enchanter is the working block you interact with, while the Dark Conduit supports the setup. Placing one without the other leaves you with an incomplete arrangement.

Placement Steps

1. Craft the Dark Enchanter using its shaped recipe.

2. Craft the Dark Conduit using its shaped recipe.

3. Choose a flat area with room around both blocks.

4. Place the Dark Enchanter first, since it is the block you will use.

5. Place the Dark Conduit next to it so the two sit together as one setup.

Both blocks come from shaped crafting, so each one needs its ingredients arranged in a fixed pattern on the grid. If a recipe will not complete, check that nothing in the layout is rotated or swapped.

Once both blocks are down, your dark enchanting station is assembled. Leave space around the pair so you can reach both blocks easily, and keep the Table Upgrade in mind as the next registry item to work with. If you relocate the station, break both blocks and place them again in the same relative positions.