How to Get Electricity in Create Crafts and Additions

Build the generator chain

Electricity in this mod comes from rotating kinetic power, so start with a working Create rotation source and a shaft network that reaches the machine you want to power. Connect the rotation output to the mod's generator block using shafts, cogs, or belts so the generator receives spin. Once the generator is turning, it produces electric energy that can be drawn from its output side.

Run power to your machines

Place the machines you want to run and connect them to the generator with the mod's electric cables. Cables carry the electric energy from the generator's output to each machine's input. Right-click the connection points to check that the cable is actually attached; a cable that is not connected will not transfer anything. If a machine does not run, confirm the generator is spinning, the cable is connected at both ends, and the machine's input side is the one facing the cable.

Check before you expand

Add machines one at a time and watch whether the generator keeps up. If rotation slows or stops, the kinetic source is not strong enough for the load, so add more rotation or split the machines across separate generators. Keep cables short where you can, and avoid running them through blocks that break the connection. Once a single generator and cable run works, copy that same pattern for each new machine instead of guessing at the layout.