How to Build and Run the Fission Chamber

Assemble the Structure

The Fission Chamber is a multiblock built from the Fission Chamber Controller, the Fission Core, Reactor Casing, Reactor Glass, Reactor Input, Reactor Output, and Reactor Energy. Form a sealed shell of Reactor Casing, use Reactor Glass for viewing panels, and mount the Fission Chamber Controller on the shell to complete the structure.

Wire Up the Ports

• Reactor Input: feed raw materials in here.
• Reactor Output: collect processed results here.
• Reactor Energy: connect your power supply here.
• Fission Core: place inside the formed shell as the reaction component.

Run hoppers or pipes to the Reactor Input and from the Reactor Output so the chamber runs without you standing at it. Route power into the Reactor Energy port before you expect anything to process.

Running the Reaction

With a valid structure, the Fission Core installed, input materials loaded, and power supplied, the controller runs the process and ejects products at the Reactor Output. If nothing happens, verify the shell is fully sealed with Reactor Casing and Reactor Glass, that the controller and all three ports are part of the frame, and that the Fission Core is present inside. Both the Fission and Fusion chambers share the same casing, glass, port, and energy blocks, so you can reuse the same building materials for either.