Refining Fluids with Refinery Plus and LiquidSelector

Place the Refinery Plus

Set down a Refinery Plus where you want to process liquids. It takes input fluid and refines it into usable output. Connect pipes or containers to feed it and to collect the results. The block is part of the fluid-handling chain alongside the Quarry Pump Module, which removes liquids from mining areas.

Choosing Fluids with LiquidSelector

Use the LiquidSelector to pick which fluid the system should handle. This is important when multiple liquids are present, such as water and lava in the same area. Set the selector to the fluid you want, then route it into the Refinery Plus. The selector prevents the wrong fluid from entering the machine and clogging the process.

Routing and Storage

Pump liquids out of your quarry using the Quarry Pump Module, send them through the LiquidSelector, then into the Refinery Plus. Store the refined output in tanks or chests. If you need to move items and fluids together, the MiningWellPlusPipe can help route outputs from a MiningWell Plus setup. Keep the Refinery Plus powered and check the StatusChecker to confirm it is running.